Flood Light with Sensor 12V - 10W

Out of stock
Technical Data
Housing ColourBlack
Input Voltage10-18V AC/DC
Power Consumption10W
Light Source1 x 10W LED
Efficiency90Lm /w
Average Lifetime50,000 hours
Beam Angle~120°
Working Temperature-40°C - 55°C
Working Humidity10 - 90%
CRIRa >70
Power Factor>0.93
Light Decay<15% (30,000 hours)
IP RatingIP64
Light ColourCool White (6000K)
DimensionsW=114mm, H=155mm, D=86mm

This LED flood consumes only 10W, yet it can replace an 80W halogen flood light, capable of lighting up a small court, backyard or work bay.

It runs directly from 12V DC or AC, making it ideal for motorhomes, caravans, baches or boats that run 12V systems.

It comes with a mounting bracket for easy installation in any location. As with any sensor light, you can adjust the daylight level, sensitivity and on time.

This flood light will save you over $1000 over its operating life of 50,000 hours!

Note: These flood lights are rated IP64, so they should be installed under cover such as an eave or carport.

Sensor Technical Data:

  • Detection Range: 8-12m
  • Detection Angle: 180°
  • Light Level Adjust: 5-1000 Lux
  • On Time Adjust: 5 sec - 5 min ±20%

Write Your Own Review
You're reviewing:Flood Light with Sensor 12V - 10W
Your Rating

All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.

This item is covered for 24 months from the time of sale.

In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.

Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.